z21 multi MAUS, Руководство пользователя

Страница: 68 / 120

68
multi
MAUS
3.3.3.2. “AUTOMATIC” does exactly what it should do: It automatically searches a digital system
for a free X-BUS address for the
multi
MAUS .
Factory setting: ON
• Confi rm the selection made with an arrow button with the Light / OK button. You will
then be returned to the initial “AUTOMATIC” level.
3.3.4. “SPEED STEPS”
The speed steps with which the
multi
MAUS controls the locomotive decoders is preset in this
menu item (more on the topic of “speed levels” in „Glossary“ on page 75 ).
Please refer to the associated operating instructions for which speed steps your decoder can
process.
You can choose between 14, 28 and 128 speed steps using the arrow buttons.
Factory setting: 28
• Confi rm with the Light / OK button. You get back to the initial “SPEED STEPS” level.
3.3.5. “RESET”
Since it is a very user-friendly digital control, you can reset the
multi
MAUS to the factory settings
not only completely, but also in parts.
“CANCEL” is the emergency exit function from this menu item, so to say.
Resetting the “SYSTEM SETTINGS” sets all entries in the “Settings” menu back to the factory
state. The locomotive library is retained. If calibration has been performed (see 3.3.5.4. ), it must
be performed again after the reset.
3.3.5.1. If you want to delete the “LIBRARY”, select this sub-item.
3.3.5.2. If you select “SPEED STEPS”, the selection made in
3.3.4. is reset to the factory value.
3.3.5.3. With “ALL” you reset your
multi
MAUS completely to the original state. All entries ever
made are deleted.
3.3.5.4. You do not normally have to “CALIBRATE” the
multi
MAUS , this is done on delivery. Due
to extreme temperature fl uctuations, however, the speed controller may have to be re-
adjusted, for instance, if a locomotive is running in the zero position. Proceed as follows:
• You will see “START?” as the fi rst screen of this sub-item. Confi rm with the Light /
OK button.
“LEFT” appears in the display.
• Turn the speed controller to the left as far as it will go. Confi rm with the Light / OK
button.
“CENTRE” appears in the display.
• Turn the speed controller to the centre (zero position) and confi rm with the Light / OK
button.
“RIGHT” appears in the display.
• Turn the speed controller to the right as far as it will go. After confi rming with the
Light / OK button,
you will return to the initial “RESET” level.
Part 3 - The menus