YASKAWA SGM7D-30F, Руководство по эксплуатации продукта

Страница: 483 / 502

4.5 FT83 SERVOPACKs with Analog Voltage/Pulse Train References
4-158
Pn50B
2
Input Signal Selections
2 0000h to
FFFFh
– 8868h All
After
restart
Setup –
Continued on next page.
Continued from previous page.
Parameter
No.
Siz
e
Name
Setting
Range
Setting
Unit
Default
Setting Applicable
Motors
When
Enabled
Classi-
fication
Refer-
ence
n.

X
N-OT (Reverse Drive Prohibit) Signal Allocation Reference
0 Enable reverse drive when CN1-40 input signal is ON (closed).
*1
1 Enable reverse drive when CN1-41 input signal is ON (closed).
2 Enable reverse drive when CN1-42 input signal is ON (closed).
3 Enable reverse drive when CN1-43 input signal is ON (closed).
4 Enable reverse drive when CN1-44 input signal is ON (closed).
5 Enable reverse drive when CN1-45 input signal is ON (closed).
6 Enable reverse drive when CN1-46 input signal is ON (closed).
7 Set the signal to always prohibit reverse drive.
8 Set the signal to always enable reverse drive.
9 Enable reverse drive when CN1-40 input signal is OFF (open).
A Enable reverse drive when CN1-41 input signal is OFF (open).
B Enable reverse drive when CN1-42 input signal is OFF (open).
C Enable reverse drive when CN1-43 input signal is OFF (open).
D Enable reverse drive when CN1-44 input signal is OFF (open).
E Enable reverse drive when CN1-45 input signal is OFF (open).
F Enable reverse drive when CN1-46 input signal is OFF (open).
n.

X

/ALM-RST (Alarm Reset) Signal Allocation Reference
0
Active on signal edge when CN1-40 input signal changes from
OFF (open) to ON (closed).
*1
1
Active on signal edge when CN1-41 input signal changes from
OFF (open) to ON (closed).
2
Active on signal edge when CN1-42 input signal changes from
OFF (open) to ON (closed).
3
Active on signal edge when CN1-43 input signal changes from
OFF (open) to ON (closed).
4
Active on signal edge when CN1-44 input signal changes from
OFF (open) to ON (closed).
5
Active on signal edge when CN1-45 input signal changes from
OFF (open) to ON (closed).
6
Active on signal edge when CN1-46 input signal changes from
OFF (open) to ON (closed).
7 Reserved setting (Do not use.)
8 The signal is always inactive.
9
Active on signal edge when CN1-40 input signal changes from ON
(closed) to OFF (open).
A
Active on signal edge when CN1-41 input signal changes from ON
(closed) to OFF (open).
B
Active on signal edge when CN1-42 input signal changes from ON
(closed) to OFF (open).
C
Active on signal edge when CN1-43 input signal changes from ON
(closed) to OFF (open).
D
Active on signal edge when CN1-44 input signal changes from ON
(closed) to OFF (open).
E
Active on signal edge when CN1-45 input signal changes from ON
(closed) to OFF (open).
F
Active on signal edge when CN1-46 input signal changes from ON
(closed) to OFF (open).
n.

X

/P-CL (Forward External Torque Limit Input) Signal Allocation Reference
0 to F The allocations are the same as the /S-ON (Servo ON) signal allocations. *1
n.X

/N-CL (Reverse External Torque Limit Input) Signal Allocation Reference
0 to F The allocations are the same as the /S-ON (Servo ON) signal allocations.
*1