YASKAWA SGM7D-30F, Руководство по эксплуатации продукта

Страница: 376 / 502

4.2 FT82 SERVOPACK with MECHATROLINK-II Communications References
4
Parameter Li
s
t
s
4-51
Pn511
2
Input Signal Selections
5 0000h to
FFFFh
– 6543h All
After
restart
Setup
*1
Continued on next page.
Continued from previous page.
Parameter
No.
Siz
e
Name
Setting
Range
Setting
Unit
Default
Setting Applicable
Motors
When
Enabled
Classi-
fication
Refer-
ence
n.

X
/DEC (Origin Return Deceleration Switch Input) Signal Allocation
0 Active when CN1-13 input signal is ON (closed).
1 Active when CN1-7 input signal is ON (closed).
2 Active when CN1-8 input signal is ON (closed).
3 Active when CN1-9 input signal is ON (closed).
4 Active when CN1-10 input signal is ON (closed).
5 Active when CN1-11 input signal is ON (closed).
6 Active when CN1-12 input signal is ON (closed).
7 The signal is always active.
8 The signal is always inactive.
9 Active when CN1-13 input signal is OFF (open).
A Active when CN1-7 input signal is OFF (open).
B Active when CN1-8 input signal is OFF (open).
C Active when CN1-9 input signal is OFF (open).
D Active when CN1-10 input signal is OFF (open).
E Active when CN1-11 input signal is OFF (open).
F Active when CN1-12 input signal is OFF (open).
n.

X

/EXT1 (External Latch Input 1) Signal Allocation
0 to 3 The signal is always inactive.
4 Active when CN1-10 input signal is ON (closed).
5 Active when CN1-11 input signal is ON (closed).
6 Active when CN1-12 input signal is ON (closed).
D Active when CN1-10 input signal is OFF (open).
E Active when CN1-11 input signal is OFF (open).
F Active when CN1-12 input signal is OFF (open).
7 to C The signal is always inactive.
n.

X

/EXT2 (External Latch Input 2) Signal Allocation
0 to F
The allocations are the same as the /EXT1 (External Latch Input 1) signal allo-
cations.
n.X

/EXT3 (External Latch Input 3) Signal Allocation
0 to F
The allocations are the same as the /EXT1 (External Latch Input 1) signal allo-
cations.