Yamaha SIGMA-G5SII, Информация о сервисе

Страница: 47 / 273

For Service Engineer
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
47/273
1.4.5.13. Self-Calibration Placement Condition
Set the placement pattern to the optimum condition placement and adjust the head offset.
<Placement Accuracy Standard Values>
(1) 90,000 CPH Operations (For High-Speed Head)
(
ⅰ
) X/Y Standard Value (Placement Deviation) <General results of Two High-Speed Heads>
Total For Each Angle (0,90,180,270)
3σ
：
40
(μm) or less
40
(μm) or less
CPK
：
1.0 or more (±SL
：
40
μm)
1.0 or more (±SL
：
4
0μm)
MAX/MIN
：
40
(μm) or less
40
(μm) or less
(
ⅱ
)
θ Standard Value (Inclined Placement) <Results of Two High-Speed Heads>
Total For Each Angle (0,90,180,270)
3σ
：
5.0 (deg) or less
CPK
：
1.0 or more (±SL
：
5.0deg)
MAX/MIN
：
5.0 (deg) or less
<Placement Conditions>
(1) PCB Finishing Position: Downstream Position
(2) Self-Calibration Function Description for Each machine
No Large Item Item
Σ-G5S Σ-G5S
II
Σ-F8
1
Self-Calibration Applicable
Head
High-Speed head
○ ○ ○
Multi-functional head
× ×
-
2
Head Offset Preparation
(Only for High-Speed Head)
Head offset A
○ ○ ○
Head offset B
○ ○ ○
For each head offset angle
○ ○ ○
For each head offset NL speed reduction
○ ○ ○
Offset automatic correction function
× × ×
3
CPK Placement Result
Display
Screen Display
○ ○ ○
Placement Result Save Function
× × ×
4 Machine Configuration PP Automatic Switching
○ ○ ○
5
PP Preparation List for Each
Self-Calibration Machine
Option
Single Transfer Front Reference LR
○ ○ ○
Single Transfer Front Reference RL
○ ○ ○
Single Transfer Rear Reference LR
○ ○ ○
Single Transfer Rear Reference RL
○ ○ ○
Dual Transfer Front Reference LR
× ×
-
Dual Transfer Front Reference RL
× ×
-
Dual Transfer Rear Reference LR
× ×
-
Dual Transfer Rear Reference RL
× ×
-
Long PCB Transfer Front Reference LR
× ×
-
Long PCB Transfer Front Reference RL
× ×
-
Long PCB Transfer Rear Reference LR
× ×
-
Long PCB Transfer Rear Reference RL
× ×
-
6 Linkage with NT-100
Placement Result Captured by NT
× × ×
Offset Correction in NT-100
× × ×
7
Additionally Requested
Function
NG point manual measurement
Management Information Message in Offset Clear
Operation
Change of Component to be placed