For Service Engineer
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
172/273
4.14. Cutter Unit Attachment/Removal Procedure
4.14.1. Cutter Unit Removal
(1) Take out the feeder cart from the machine.
Lower the feeder base with the machine
stopped.
Disconnect the machine connecting
connectors and pull out the feeder cart.
(2) Remove the machine’s area cover.
Undo the lock on the both sides and remove the cover.
(3) Loosen the two set bolts for the cutter unit to remove.
Remove the bolts on the right and left sides (two locations).
Undo the lock on the right and left sides (two locations).
Fig.D91
Fig.D92
Fig.D93