Woodward 2301E, Инструкция по установке и эксплуатации, Страница: 87 / 182

Manual 26641 2301E Digital Control
Woodward 77
E**ANALOG INPUT OPTIONS**
01 CONFIGURATION ERROR ? (monitor)
If this value is TRUE, then both analog inputs are configured for the same
function. You must configure both analog inputs different from each other (other
than a 1, Not Used).
02 SEL AI #1 FUNCTION (1-6) dflt = 4 (1
–6)
Selects the function for the analog input:
1 = NOT USED
2 = REMOTE SPEED SETPOINT
3 = BASELOAD SETPOINT
4 = SYNC INPUT
5 = MANIFOLD AIR PRESSURE LIMITER INPUT
6 = EXTERNAL LOAD SENSOR
03 DISPLAY AI #1 FUNCTION (monitor)
Displays the function for analog input #1.
04 SEL AI #1 TYPE (1-3)
dflt = 3 (1
–3)
Sets the type of input used:
1 = 4
–20 mA
2 = 1
–5 Volt
3 = ±2.5 Volt
05 DISPLAY AI #1 TYPE (monitor)
Displays the type of input for analog input #1.
06 USE INPUT #1 FAIL TRIP dflt = FALSE (FALSE, TRUE)
When set TRUE a failure of the input signal gives a major alarm, which
shutdowns the engine. When set FALSE only an alarm is given, and the engine
is not stopped.
07 SEL AI #2 FUNCTION (1-6) dflt = 3 (1
–6)
Selects the function for the analog input:
1 = NOT USED
2 = REMOTE SPEED SETPOINT
3 = BASELOAD SETPOINT
4 = SYNC INPUT
5 = MANIFOLD AIR PRESSURE LIMITER INPUT
6 = EXTERNAL LOAD SENSOR
08 DISPLAY AI #2 FUNCTION (monitor)
Displays the function for analog input #2.
09 SEL AI #2 TYPE (1-3) dflt = 1 (1
–3)
Sets the type of input used:
1 = 4
–20 mA
2 = 1
–5 Volt
3 = ±2.5 Volt
10 DISPLAY AI #2 TYPE (monitor)
Displays the type of input for analog input #2.