Woodward 2301E, Инструкция по установке и эксплуатации, Страница: 175 / 182

Manual 26641 2301E Digital Control
Woodward 165
Appendix F.
Quick Engine Start Guide
This quick start guide will allow the user to quickly configure the 2301E with
minimal settings for simple speed control. It uses the 2301E Toolkit Service Tool
to configure the control.
1.
Download the 2301E Toolkit Service Tool and the SOS Servlink OPC
Server software from
www.woodward.com/software and install it on your
computer.
2. Connect a Null Modem cable from the computer to the RS-232 port on the
2301E.
3. Start the 2301E Toolkit Service Tool and Click on Connect. The Main
Screen will display once connected.
4. On the right hand side of the Main Screen is a button for the First Time
Configuration Wizard. Press this button to configure the control.
5. Once finished with the Configuration Wizard, go back to the Main Page and
select the Final Configuration Settings button.
6. Review all of the settings for the engine and generator and verify that they
are correct for your application.
7.
The engine is ready to be started. Select the “Tuning 1” button and be ready
to tune either the “IDLE PROP GAIN 1” or the “RATED PROP GAIN 1”,
depending if you are starting in Idle Speed or Rated Speed. If the engine is
unstable, lower the gain until stability is achieved.
8. Chapter 6 provides a tuning method to properly tune the engine control for
optimum performance.
Figure E-1.
Location of “First Time Configuration Wizard” button