Woodward 2301E, Инструкция по установке и эксплуатации, Страница: 67 / 182

Manual 26641 2301E Digital Control
Woodward 57
Step 16:
To download the saved file (.tc) back into a control, the engine must be
shutdown. Click on the Lock I/O icon. . It will warn you that Locking the I/O
will cause a control shutdown. Are you sure you want to continue. Select Yes to
continue. I will then tell you that a Lock I/O has been issued to the control. The
LED between terminals 30 and 31 will turn red. Select OK.
Step 17:
Open the .tc file that you saved by selecting File \ Open.
Click on the “Send Tunable List” icon
. The saved Tunable List will be sent
to the control.
Step 18:
Close the Tunable List file and select the Reset icon . A Reset Control
window will pop up. Read the w
arnings and select “The warnings above have
been considered” and select Save Values button. The select Reset.
The SOS Servlink OPC Server will then reconnect.
Step 19:
Verify the settings in the control. This is important to make sure that you
downloaded the correct file (.tc), and to make sure that the most critical settings
were loaded.