2470 High Voltage SourceMeter Instrument Reference Manual
Section 2: Installation
2470-901-01 Rev. A /
May
2019
2-21
To set up automatic IP address selection using the front panel:
1.
Press the
MENU
key.
2.
Under System, select
Communication
.
3.
Select the
LAN
tab.
4.
For TCP/IP Mode, select
Auto
.
5.
Select
Apply Settings
to save your settings.
Set up manual LAN configuration
If necessary, you can set the IP address on the instrument manually.
You can also enable or disable the DNS settings and assign a host name to the DNS server.
Contact your corporate information technology (IT) department to secure a valid IP address for the
instrument when placing the instrument on a corporate network.
The instrument IP address has leading zeros, but the computer IP address cannot.
To set up manual IP address selection on the instrument:
1.
Press the
MENU
key.
2.
Under System, select
Communication
.
3.
Select the
LAN
tab.
4.
For TCP/IP Mode, select
Manual
.
5.
Enter the
IP Address
.
6.
Enter the
Gateway
address.
7.
Enter the
Subnet
mask.
8.
Select
Apply Settings
to save your settings.
Set up LAN communications on the computer
This section describes how to set up the LAN communications on your computer.
Do not change your IP address without consulting your system administrator. If you enter an
incorrect IP address, it can prevent your computer from connecting to your corporate network or it
may cause interference with another networked computer.
