Section 3: Instrument description
2470 High Voltage SourceMeter Instrument Reference Manual
3-48
2470-901-01 Rev. A /
May
2019
Define the setup used when power is turned on
You can select a configuration to be used when power is turned on.
From the front panel:
1.
Set the instrument to the settings that you want it to have each time the power is turned on.
2.
Press the
MENU
key to open the main menu. Under Scripts, select
Create Setup
.
3.
Select
Create
. A keyboard is displayed.
4.
Enter the name of the new script, and then select
ENTER
on the keyboard to save it. The
instrument saves all present system settings to the script and displays a confirmation message.
5.
Select
OK
.
6.
Press the
EXIT
key to return to the main menu.
7.
Under Scripts, select
Run
. The RUN SCRIPTS window opens.
8.
Select the script you created.
9.
Select
Copy to Power Up
.
10. Select
OK
on the confirmation message.
Using a SCPI command:
Send the command:
:SYSTem:POSetup <name>
Where
<name>
is:
•
RST
: Use the *RST defaults.
•
SAV0
: Use the setup stored at memory location 0
•
SAV1
: Use the setup stored at memory location 1
•
SAV2
: Use the setup stored at memory location 2
•
SAV3
: Use the setup stored at memory location 3
•
SAV4
: Use the setup stored at memory location 4
Using a TSP command:
Save the script that you want to use as the power-on default to be
autoexec
. For example, to save
the commands that are presently in the instrument to be the power-on defaults, send the command:
createconfigscript("autoexec")
