Tektronix Keithley SourceMeter 2470, Справочное руководство

Страница: 682 / 995

Section 14: TSP command reference 2470 High Voltage SourceMeter Instrument Reference Manual
14-42 2470-901-01 Rev. A /
May
2019
Output:
Volt DC, Volt DC, Volt DC
Also see
buffer.delete() (on page 14-9)
buffer.make() (on page 14-12)
bufferVar.clear() (on page 14-18)
print() (on page 14-99)
printbuffer() (on page 14-100)
Reading buffers (on page 6-1)
Remote buffer operation (on page 6-25)
buffer.write.format()
This function sets the units and number of digits of the readings that are written into the reading buffer.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
buffer.write.format( bufferVar , units , displayDigits )
buffer.write.format( bufferVar , units , displayDigits, extraUnits)
buffer.write.format( bufferVar , units , displayDigits, extraUnits, extraDigits )
bufferVar The name of the buffer
units The units for the first measurement in the
buffer index:

buffer.UNIT_AMP

buffer.UNIT_AMP_AC

buffer.UNIT_CELSIUS

buffer.UNIT_DECIBEL

buffer.UNIT_FAHRENHEIT

buffer.UNIT_FARAD

buffer.UNIT_HERTZ

buffer.UNIT_KELVIN

buffer.UNIT_NONE

buffer.UNIT_OHM

buffer.UNIT_PERCENT

buffer.UNIT_RATIO

buffer.UNIT_RECIPROCAL

buffer.UNIT_SECOND

buffer.UNIT_VOLT

buffer.UNIT_VOLT_AC

buffer.UNIT_WATT

buffer.UNIT_X
displayDigits
The number of digits to use for the first measurement:

buffer.DIGITS_3_5

buffer.DIGITS_4_5

buffer.DIGITS_5_5

buffer.DIGITS_6_5

buffer.DIGITS_7_5

buffer.DIGITS_8_5
extraUnits The units for the second measurement in the buffer index; the selections are the same
as
units
(only valid for buffer style
WRITABLE_FULL
); if not specified, uses the value
for
units