Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 573 / 597

INSTRUMENTATION / DRIVER INFORMATION 8C-3
1. Fuel level gauge
2. Fuel level gauge
terminal
3. Fuel level gauge terminal
4. Float
1. To wiring harness
2. Cylinder block
ON-VEHICLE SERVICE
FUEL METER/FUEL GAUGE UNIT
FUEL LEVEL GAUGE
INSPECTION
Remove fuel sender gauge referring to Section 6C of this manual.
Use an ohmmeter to confirm that resistance of sender gauge unit
changes with change of float position.
Float Position
Fuel
Meter
Resistance (
Ω
)
“a”
51.7 mm
(2.04 in.)
F 6 – 8
“b”
139.6 mm
(5.50 in.)
1 / 2 29.5 – 35.5
“c”
254.9 mm
(10.0 in.)
E 94 – 96
If measured valve is out of specification, replace fuel sender gauge.
ENGINE COOLANT TEMPERATURE SENSOR
(ECT SENSOR)
REMOVAL, INSPECTION AND INSTALLATION
Refer to ENGINE COOLANT TEMPERATURE SENSOR (ECT
SENSOR) in Section 6E3.
OIL PRESSURE SWITCH
REMOVAL AND INSTALLATION
Refer to OIL PRESSURE SWITCH in Section 6A3 of this manual
for details.
INSPECTION
Use an ohmmeter to check switch continuity.
During Engine Running No continuity (
1 Ω
)
At Engine Stop Continuity (0
Ω
)