Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 557 / 597

3. Differential right case
3. Differential left case
5. Differential pinion
7F-10 DIFFERENTIAL (REAR)
DIFFERENTIAL CASE
1) After applying differential oil to differential gear (4), pinions (5),
pinion shafts (6), thrust washer (2) and spring washer (1), install
them in differential right case (3).
For correct installing direction of thrust washer (2) and spring
washer (1), refer to the figure.
2) When installing pinion shaft No.2 (2) (shorter) into differential
case and pinion, insert its “a” side into pinion joint (1).
NOTE:
“a” is longer than “b”. (“a” > “b”)
3) Check differential pinion gear (1) for smooth rotation.
4) In the same manner as described in Step 1), install thrust washer
(2), spring washer (1) and differential gear (4).
5) Install differential left case (1) and then tighten screws (2) to spe-
cified torque.
“A”: Cement 99000-32110
Tightening torque
Differential case screw (a):
9 N
.
m (0.9 kg-m, 6.5 lb-ft)