1. Heater (Glow) plug
MAINTENANCE AND LUBRICATION
0B-9
ITEM 1-5
Exhaust System Inspection
WARNING:
To avoid danger of being burned, do not touch exhaust sys-
tem when it is still hot.
Any service on exhaust system should be performed when
it is cool.
Check exhaust system as follows:
D
Check rubber mountings for damage and deterioration.
D
Check exhaust system for leakage, loose connections, dents,
and damages.
If bolts or nuts are loose, tighten them to specification.
Refer to SECTION 6K for torque specification of bolts and nuts.
D
Check nearby body areas for damaged, missing or mispositioned
parts, open seams, holes, loose connections or other defects
which could permit exhaust fumes to seep into vehicle.
D
Make sure that exhaust system components have enough clear-
ance from underbody to avoid overheating and possible damage
to floor carpet.
D
Any defects should be fixed at once.
ITEM 1-6
Heater (Glow) Plugs Inspection
Check for external damage such as deformation, scratch, crack,
etc.
FUEL SYSTEM
ITEM 3-1
Air Cleaner Filter Replacement
1) Unclamp air cleaner case clamps.
2) Replace air cleaner filter with new one.
3) Clamp case securely.
Содержание GRAND VITARA XL-7
Страница 285: ...ENGINE AND EMISSION CONTROL SYSTEM RHZ ENGINE 6E3 7 SYSTEM WIRING DIAGRAM For Vehicle Equipped with Single Connector ECM...
Страница 287: ...ENGINE AND EMISSION CONTROL SYSTEM RHZ ENGINE 6E3 9 For Vehicle Equipped with Triple Connector ECM...
Страница 521: ...7B1 116 AUTOMATIC TRANSMISSION 4 A T BEARING AND RACE INSTALLATION DIAGRAM...
Страница 597: ...Prepared by 1st Ed Feb 2002 Printed in Japan Printing 600...