Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 388 / 597

1. Circlip
2. Thickness gauge
7A2-40 MANUAL TRANSMISSION
COUNTER SHAFT ASSEMBLY
1) Install counter shaft bearing (1) to counter shaft (2).
2) Set inner race (2) to counter shaft front bearing (1) and press-fit
bearing with press and special tool.
NOTE:
When installing bearing, bring it so that its groove for circlip
is in the front.
Special tool
(A): 09940-54950
3) Select circlip that will make its thrust clearance 0.1 mm
(0.0039 in.) or less and install it.
Circlip thickness specification:
ID mark Circlip thickness
A 2.05 – 2.10 mm (0.0807 – 0.0826 in.)
B 2.10 – 2.15 mm (0.0826 – 0.0846 in.)
C 2.15 – 2.20 mm (0.0846 – 0.0866 in.)
D 2.20 – 2.25 mm (0.0866 – 0.0885 in.)
E 2.25 – 2.30 mm (0.0885 – 0.0905 in.)
F 2.30 – 2.35 mm (0.0905 – 0.0925 in.)
Special tool
(B): 09900-06107