Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 213 / 597

ENGINE MECHANICAL (RHZ ENGINE) 6A3-15
6. Starting motor
7) Remove crankshaft pulley (1).
If it is hard to remove, install crankshaft pulley bolt without
washer and use special tools.
Special tool
(A): 09944-36011
8) Remove timing belt covers.
9) Turn crankshaft so that crank timing pulley key (2) turns up, and
then lock camshaft timing belt pulley (1) inserting special tool
(A) into cylinder head hole as shown in figure.
Special tool
(A): 09910-26540 / OUT0000151
10) Remove fuel filter assembly.
11) Lock flywheel (MT) or drive plate (AT) inserting special tool (B)
into holes in both cylinder block and flywheel (MT) (or drive
plate (AT)) with crank timing pulley key turned up.
Special tool
(B): 09910-26530 / OUT0000160
12) Loosen timing belt tensioner bolt (3). Then remove timing belt
turning timing belt tensioner (4) clockwise with special tool (C).
Special tool
(C): 09919-56550 / OUT0000141
13) Remove timing belt tensioner (4) and roller (5).
INSPECTION
D
Inspect timing belt for wear or crack.
Replace it as necessary.