[A]: Engine with camshaft hub
[B]: Engine without camshaft hub
A: Camshaft timing belt pulley side
ENGINE MECHANICAL (RHZ ENGINE)
6A3-31
5) Remove camshaft timing belt pulley bolt(s) (2) or camshaft hub
bolts (1) (if equipped) by using special tool.
Special Tool
(A): 09910-26540 / OUT0000151
6) Remove camshaft timing belt pulley (3) and camshaft hub (if
equipped).
7) Loosen camshaft housing bolts in such order as indicated in
figure and remove them.
8) Remove camshaft housing.
9) Remove camshaft and camshaft oil seal.
10) Remove valve rocker (1) with ball valve rocker (2).
NOTE:
D
Never disassemble ball valve rocker.
D
Don’t apply force (1) to body of ball valve rocker, for oil
in high pressure chamber in it will leak.
D
Immerse removed ball valve rocker in clean engine oil
and keep it there till reinstalling it so as to prevent oil
leakage. If it is left in air, place it with its bucket body fac-
ing down. Don’t place on its side or with bucket body fac-
ing up.
Содержание GRAND VITARA XL-7
Страница 285: ...ENGINE AND EMISSION CONTROL SYSTEM RHZ ENGINE 6E3 7 SYSTEM WIRING DIAGRAM For Vehicle Equipped with Single Connector ECM...
Страница 287: ...ENGINE AND EMISSION CONTROL SYSTEM RHZ ENGINE 6E3 9 For Vehicle Equipped with Triple Connector ECM...
Страница 521: ...7B1 116 AUTOMATIC TRANSMISSION 4 A T BEARING AND RACE INSTALLATION DIAGRAM...
Страница 597: ...Prepared by 1st Ed Feb 2002 Printed in Japan Printing 600...