Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 236 / 597

6A3-38 ENGINE MECHANICAL (RHZ ENGINE)
D
Flatness of gasketed surface:
Using a straightedge and thickness gauge, check surface at 6
locations in total. If distortion limit, given below, is exceeded, cor-
rect gasketed surface with a surface plate and abrasive paper of
about #400 (Waterproof silicon carbide abrasive paper): place
paper on and over surface plate, and rub gasketed surface
against paper to grind off high spots. Should this fail to reduce
thickness gauge readings to within limit, replace cylinder head.
Leakage of combustion gases from this gasketed joint is often
due to warped gasketed surface: such leakage results in reduced
power output.
Limit of distortion: 0.05 mm (0.002 in.)
ASSEMBLY
1) Install valve to valve guide.
Before installing valve to valve guide, apply engine oil to stem
seal, valve guide bore, and valve stem.
2) Install valve spring and spring retainer.
3) Using special tool (Valve lifter), compress valve spring and fit
two valve cotters (1) into groove in valve stem.
Special Tool
(A): 09916-14510
(B): 09916-14910
(C): 09916-84511
4) Install valve rockers and camshaft referring to “CAMSHAFT
AND VALVE ROCKERS” in this section.
5) Install intake manifold, exhaust manifold with turbocharger, wa-
ter outlet box, injectors, common rail and glow plugs to cylinder
head.