ENGINE FUEL
6C-5
2. Fuel tank inlet (check) valve
2-WAY CHECK VALVE
(TANK PRESSURE CONTROL VALVE)
INSPECTION
1) Air should pass through 2-way check valve (1) smoothly from
fuel tank side (Black side (2) of 2-way check valve) to Orange
side (3) when blown hard.
2) From Orange side, even when blown softly, air should come out
of Black side.
3) If air doesn’t pass through valve in step 1) or hard blow is re-
quired in step 2), replace 2-way check valve.
WARNING:
DO NOT SUCK air through 2-way check valve.
Fuel vapor inside the valve is harmful.
FUEL TANK
REMOVAL
CAUTION:
This work must not be done when engine is hot. If done so,
it may cause adverse effect to catalyst.
1) Disconnect negative cable at battery.
2) Remove fuel filter cap.
3) Insert hose of a hand operated pump into fuel filler hose (1) and
drain fuel in space “A” in the figure (drain fuel through it till fuel
stops).
CAUTION:
Do not force hose of a hand operated pump into fuel tank.
Doing so can damage inlet valve.
Содержание GRAND VITARA XL-7
Страница 285: ...ENGINE AND EMISSION CONTROL SYSTEM RHZ ENGINE 6E3 7 SYSTEM WIRING DIAGRAM For Vehicle Equipped with Single Connector ECM...
Страница 287: ...ENGINE AND EMISSION CONTROL SYSTEM RHZ ENGINE 6E3 9 For Vehicle Equipped with Triple Connector ECM...
Страница 521: ...7B1 116 AUTOMATIC TRANSMISSION 4 A T BEARING AND RACE INSTALLATION DIAGRAM...
Страница 597: ...Prepared by 1st Ed Feb 2002 Printed in Japan Printing 600...