Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 232 / 597

6A3-34 ENGINE MECHANICAL (RHZ ENGINE)
A: Camshaft timing belt pulley side
18) Disconnect exhaust No.1 pipe (1) from turbocharger outlet
pipe (2).
19) Loosen cylinder head bolts in such order as indicated in figure
and remove them.
20) Check all around cylinder head for any other parts required to
be removed or disconnected and remove or disconnect what-
ever necessary.
21) Remove cylinder head with intake manifold, exhaust manifold,
turbocharger, water outlet box, injectors and common rail using
lifting device.
DISASSEMBLY
1) For ease in servicing cylinder head, remove intake manifold, ex-
haust manifold with turbocharger, water outlet box, injectors,
common rail and glow plugs.
2) Remove camshaft and valve rockers referring to “CAMSHAFT
AND VALVE ROCKERS” in this section.
3) Clean valve face and then measure protrusion at 4 points (1) of
each valve using special tool as shown in figure.
Special Tool
(A): 09910-26510 / OUT0000005
Average of values In Max. 0.2 mm (0.008 in.)
measured at 4 points
Ex
If average is out of specification, grind valve seat and then lap
valve on seat.