Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 16 / 597

1. Oil filter
0B-6 MAINTENANCE AND LUBRICATION
ITEM 1-2
Camshaft Timing Belt Replacement
Replace belt with new one. Refer to “Timing Belt” in SECTION 6A3
for replacement procedure.
CAUTION:
D
Do not bend or twist timing belt.
D
Do not allow timing belt to come into contact with oil, wa-
ter, etc.
ITEM 1-3
Engine Oil and Oil Filter Change
It is recommended to use the following engine oil or higher quality
level oils.
5W-30 : API CF (except CF-2) or ACEA B3-98
15W-40 : API SG/CF (except CF-2) or ACEA B2-96
Select the appropriate oil viscosity according to the left chart.
Before draining engine oil, check engine for oil leakage. If any evi-
dence of leakage is found, make sure to correct defective part be-
fore performing the following work.
1) Drain engine oil by removing drain plug (1).
2) After draining oil, wipe drain plug clean. Reinstall drain plug, and
tighten it securely as specified below.
Tightening Torque
(a): 34 N
.
m (3.4 kg-m, 25.0 lb-ft)
3) Loosen oil filter by using oil filter wrench (Special tool).
Special Tool
(A): 09915-46510