Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 393 / 597

2. Thickness gauge
(E) (D)
2
MANUAL TRANSMISSION 7A2-45
8) Install reverse gear (1).
9) Select circlip (1) that will make its thrust clearance 0.1 mm
(0.0039 in.) or less and install it.
Circlip thickness specification:
ID mark Circlip thickness
5 2.25 – 2.30 mm (0.0886 – 0.0905 in.)
11 2.30 – 2.35 mm (0.0905 – 0.0925 in.)
12 2.35 – 2.40 mm (0.0925 – 0.0944 in.)
13 2.40 – 2.45 mm (0.0944 – 0.0964 in.)
14 2.45 – 2.50 mm (0.0964 – 0.0984 in.)
15 2.50 – 2.55 mm (0.0984 – 0.1003 in.)
16 2.55 – 2.60 mm (0.1003 – 0.1023 in.)
17 2.61 – 2.66 mm (0.1024 – 0.1047 in.)
18 2.67 – 2.72 mm (0.1048 – 0.1070 in.)
19 2.73 – 2.78 mm (0.1071 – 0.1094 in.)
20 2.79 – 2.84 mm (0.1095 – 0.1118 in.)
21 2.85 – 2.90 mm (0.1119 – 0.1141 in.)
22 2.91 – 2.96 mm (0.1142 – 0.1165 in.)
23 2.97 – 3.02 mm (0.1166 – 0.1188 in.)
10) Install 5th gear (1) and output bearing (2) by using special tool.
Special tool
(A): 09926-36510
(B): 09926-36510-001
(C): 09926-36510-002
(D): 09926-36510-003
(E): 09926-36510-004