Suzuki GRAND VITARA XL-7, Руководство по обслуживанию

Страница: 355 / 597

3
MANUAL TRANSMISSION 7A2-7
3) If control lever locating bolts (1) are replaced or retightened,
torque them as specified below.
Replacing of control lever locating bolts (1) requires thread lock
cement.
“B”: Cement 99000-32110
Tightening torque
Control lever locating bolt (a):
17 N
.
m (1.7 kg-m, 12.5 lb-ft)
4) Apply grease to pivot portions and seat, then install shift control
lever.
“A”: Grease 99000-25010
5) Install transmission boot No.1 (1) from inside of cabin and clamp
it with a new clamp (2) securely.
6) Install transfer boot No.1 (1) securely on lift and clamp it by using
a new clamp (2).
7) Tighten transmission boot No.2 (2) with boot cover and console
box bracket (1).
Tightening torque
Control lever boot cover bolt (a):
15 N
.
m (1.5 kg-m, 11.0 lb-ft)
8) Install console box.
NOTE:
Be sure that flare end of transmission boot No.3 (3) is en-
gaged with console box.