Spectra Logic BlackPearl, Руководство пользователя

Страница: 227 / 457

Chapter 7 - Configuring Network Attached Storage Create a Share
C
REATE A
S
HARE
After you create one or more volumes, you can share a volume using either the NFS or CIFS
service. Decide which method to use for sharing and follow the appropriate instructions
below.
• Create a CIFS Share , below
• Create an NFS Share on page 232
Note:
Shares are not available until network settings are configured. See Configure the
Data Connection on page 55 .
Create a CIFS Share
Spectra Logic recommends using Active Directory to control access to CIFS shares on the
Verde arrays. However, if your Windows operating system environment does not use
Active Directory, you can enable local administrator status on the system to allow a
specified user to access the CIFS shares in a Windows workgroup environment. The
username and password configured on the BlackPearl system are used to access the CIFS
shares when using a Windows workgroup environment.
Join an Active Directory Domain
If your Windows environment uses Active Directory, you must join an Active Directory
domain before creating a CIFS share. See
Configure the Active Directory Service on page 187
for more information.
Continue with Enable Local Administrator Status below.
November 2020 User Guide-BlackPearl Converged Storage System
- 227 -