Chapter 6 - Additional Configuration Options
Configure Network Connections and Settings
2.
Select the row of the data connection you want to edit and select
Action > Edit
. A the Edit Aggregate
Data Connection
dialog box displays.
Figure 85
The Edit Aggregate
Data
#,# dialog box.
3.
Select or clear the
Data Port(s)
you want to configure into an aggregate data interface.
Only one type of port can be used in an aggregation. For example, you cannot use both
10 GigE and 40 GigE ports in the same link aggregation.
4.
Select
DHCP
to configure the system to automatically acquire an IPv4 address using
DHCP. This setting does not apply to IPv6.
5.
To configure a static address, click the
+
button and enter the following information:
•
IP Address
—Enter a valid IPv4 or IPv6 address.
Note:
You cannot enter an IPv4 address if you selected DHCP in
.
•
Prefix Length
—Enter the subnet mask.
Note:
If desired, you can enter
Aliases
, multiple IP and prefix lengths assigned to the
data port. Use the
+
button to configure additional IP and Netmask addresses.
You can configure a maximum of 16 aliases.
To remove an existing static address, click the
-
button.
6.
If applicable, enter the
IPv4 Default Gateway
.
Notes:
• If you selected DHCP in
, this option is unavailable.
• The gateway entered for the last configured IPv4 connection sets the default
gateway for the BlackPearl system.
November 2020
User Guide-BlackPearl Converged Storage System
- 175 -
