Chapter 4 - Configuring Advanced Bucket Management
Create a Replication Target
Use the instructions in this section to configure a BlackPearl target.
1.
From the menu bar, select
Configuration > Advanced Bucket Management > Replication
Targets
to display the Replication Targets screen.
Figure 34
The Replication Targets screen
2.
Select
Action > New BlackPearl Target
. The New BlackPearl Target dialog box displays.
Figure 35
The New BlackPearl Target dialog box.
3.
Enter a name for the BlackPearl target in the
Name
field.
4.
Enter the system name of the target system, or the IP address of the target system’s data
port, as the
Data Path End Point
.
Note:
Do not use the IP address of the target system’s management port.
November 2020
User Guide-BlackPearl Converged Storage System
- 110 -
