5 - 29
5. DISPLAY AND OPERATION SECTIONS
(8) LSP/LSN (stroke end) automatic ON setting (h)
Put a check mark in the check box to automatically turn ON LSP/LSN. After selecting the check box, the
LSP and the LSN of external signal are ignored.
(9) Automatic ON setting for the movement to the Z-phase signal (i)
To move to the first Z-phase signal of the move di move direction, put a check mark in the check
box.
(10) Pulse move distance unit selection (j)
Select with the option buttons whether the moving distance set is in the command input pulse unit or in the
encoder pulse unit.
5.10.4 Motor-less operation
Without connecting the servo motor, you can provide output signals or monitor the status display as if the
servo motor is running in response to input device. This operation can be used to check the sequence of a
host programmable logic driver or the like.
(1) Operation
Turn off the servo-on (SON), and then select motor-less operation. After that, perform external operation as
in ordinary operation.
(2) Status display
Change the display to the status display screen by pressing the "MODE" button. (Refer to section 5.2.) The
status display screen can be changed by pressing the "UP" or the "Down" button. (Refer to section 5.3.)
(3) Termination of motor-less operation
To terminate the motor-less operation, turn the power off.
