5 - 17
5. DISPLAY AND OPERATION SECTIONS
(2) Setting of 4 or more digits
The following example gives the operation procedure to change the position data (target position) of the
point table No.1 to "123456".
Press MODE three times.
The set value of the
specified point table No.
flickers.
Press SET once.
Setting of
upper 3 digits
Press UP or DOWN to
change the setting.
Press SET once.
Enter the setting.
Setting of lower 3 digits
(The decimal point of the first
digit is lit.)
To the next setting
To the next setting
Press SET once.
Press UP or DOWN to
change the setting.
Press SET once.
Press UP or DOWN to choose the point table No.1.
The point table No. is displayed.
Press SET once.
Press SET once.
Choose the setting screen
of the upper 3 digits or the
lower 3 digits with MODE.
After setting (2), to shift to the setting of higher or lower 3 digits in the same point table No., press the
"MODE" button.
To shift to other items of the same point table No., press the "UP" or the "DOWN" button.
To shift to the next point table No., press the "MODE" button after shifting to other items of the same point
table No. by pressing the "UP" or "DOWN" button.
