Siemens SINUMERIK 840Di sl, Руководство по вводу в эксплуатацию

Страница: 367 / 632

NC Commissioning with HMI Advanced
11.3 System data
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
367
Machine data
Table 11-4 Resolutions: Machine data
Number Name Name/remarks
General ($MN_ ... )
9004
DISPLAY_RESOLUTION Display resolution
9011 DISPLAY_RESOLUTION_INCH Display resolution for INCH system of measurement
10200 INT_INCR_PER_MM Computational resolution for linear positions
10210 INT_INCR_PER_DEG Computational resolution for angular positions
References:
/FB/ Function Manual, Basic Functions, G2 Velocities, Traversing Ranges, Accuracies,
Chapter: I/O Resolution, Computational Resolution
11.3.2 Standardization of physical units of machine data and setting data
Standard
Machine and setting data having a physical unit are interpreted in the input/output units listed
in the following table by default, depending on the scaling system (metric/inch).
The internally used units which the NC uses are independent and fixed.
Table 11-5 Normalization of phys. units of machine data and setting data
Physical unit Input/output units for the standard scaling system Internally used unit
Metric Inch
Linear position 1 mm 1 inch 1 mm
Angular position 1 degrees 1 degrees 1 degrees
Linear velocity 1 mm/min. 1 inch/min. 1 mm/s
Angular velocity 1 rpm 1 rpm 1 deg./s
Linear acceleration 1 m/s
2
1 inch/s
2
1 mm/s
2
Angular acceleration 1 rev/s
2
1 rev/s
2
1 degree/s
2
Linear jerk 1 m/s
3
1 inch/s
3
1 mm/s
3
Angular jerk 1 rev/s
3
1 rev/s
3
1 degree/s
3
Time 1 s 1 s 1 s
Position controller servo gain 1 s
-1
1 s
-1
1 s
-1
Rev. feedrate 1 mm/rev 1 inch/rev 1 mm/degree
Compensation value linear position 1 mm 1 inch 1 mm
Compensation value angular position 1 degrees 1 degrees 1 degrees