154
34
:
PID control pause
This terminal function is used for pause control of operating PID. When it is enabled, PID adjustment will stop and the
VFD remain the present frequency. Continue PID adjustment when the function is disabled, the running frequency
will change to the adjustment.
35
:
start traverse operation
If the traverse operation is set to be manual start, then traverse function is enabled if this function is selected.
Otherwise the VFD runs with preset frequency of traverse operation. Refer to F9.55
~
F9.65.
36: pause traverse operation
Short-circuit the terminal with COM, the VFD will stop the traverse operation and remain the present frequency; if
the terminal is disabled, the VFD will resume traverse operation.
37: traverse reset
If this function is selected, closing the terminal can clear the information about traverse status no matter the drive is
in auto or manual start mode. Traverse operation continues after this terminal is disconnected (run preset freq. if
there is preset freq.). See F9.55
~
F9.65.
38
:
PLC control input
This terminal function is enabled when PLC input method is manual input method via multi-function terminal, and
PLC operates normally when operating command arrives; if the terminal function is disabled, the VFD runs in zero
frequency when operating command arrives.
39
:
PLC pause
It is used to pause the PLC operation. The driver will operate at zero frequency if this terminal is enabled, but the
running time is not counted; if the terminal is disabled, the driver will start in rotating speed tracking method and
continue the PLC operation. Refer to F9.00
~
F9.53 for function description.
40
:
PLC status reset
When the drive stops in PLC mode and this terminal function is enabled, the memorized PLC operating information
(operating stage, operating time, operating frequency, etc.) will be cleared. The driver will restart if the terminal
function is disabled. See F9.
41
:
clear the counter to zero
Short-circuit the terminal with COM, this function is to clear to zero and is used in conjunction with function NO.42.