124
corresponding curve and AI1 input filtering time. Refer to function code F6.00
~
F6.05 for introduction.
2
:
AI2
Torque command is set by analog input AI2. The positive or negative value of AI2 input correspond to torque
command value of forward or reverse direction.
When using this function, users should set physical quantity of AI2 input as torque command, and also AI2 setting
corresponding curve and AI2 input filtering time. Refer to function code F6.06
~
F6.11 for introduction.
3
:
RS485 communication
Torque command is given by RS485 communication.
F4.13
Torque set by keypad
-200.0%
~
200.0%* rated current of motor
0.0%
This function code corresponds to torque setting value when torque command is set to given by keypad number.
F4.14
Speed limit channel 1 of torque control mode
(
forward
)
0
~
2
0
This function code is used to set forward speed limit channel of torque control.
0
:
keypad number setting 1
See F4.16 setting.
1
:
AI1
Forward speed limit channel is given by AI1 in torque control. See function code F6.00~F6.05.
2
:
AI2
Forward speed limit channel is given by AI2 in torque control. See function code F6.06~F6.11 description.
F4.15
Speed limit channel selection 2 of torque control mode
(
reverse
)
0
~
2
0
This function code is used to set reverse speed limit channel of torque control.