28
When setting the user password, press five-digit number and press
to confirm, the password will take effect
automatically 3 minutes later, or just power down to make it effective. After that, if the password is not set right, keypad
will display “-Err-”, and when checking function codes, all will display “-----” except the password item (displays “00000”).
These function codes parameters can’t be checked and modified until the password is set right and the keypad displays
“-En--”.
When password modifying is required, choose function code F0.00, and press
to enter password authentication
status. Move to modifying status after password verified successfully. Input a new password and press
to confirm.
Power-down or wait for 3 minutes, the new password will take effect.
Example 1: change user password “22222” to “55555”, check function code F1.02.
①
Press
to enter programming status, LED displays function code F0.00, flicker bit stays in the ones place.
②
Press
, move flicker bit among hundreds place, tens place and ones place of function items.
③
Press
key or
key to modify the digit in the according digit place. LED displays F1.20.
④
Press
, the according data “-----” of F1.20 is displayed.
⑤
Press
to enter F1.03, repeat step 2 and step 3, check according data “00000” of F0.00.
⑥
Press
key or
key to modify the digit in the according digit place, LED displays “22222”, and the
password is set up.
⑦
Press
, it displays “-En--”, meanwhile function code displays F0.01.
⑧
Repeat step 2 and step 3, check the according data “00000” of F0.00 and modify it to “55555”, press
to