Ross Carbonite Series Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 96

Ross Carbonite Series Скачать руководство пользователя страница 58

Animation Controls

The MediaManager interface allows you to manually
control the play-out of an animation.

Figure 25: Media-Store Channel — Animation Controls

Table 5: Animation Controls

Description

Name

Icon

Play the animation loaded in
the Media-Store channel.

Play

Turns

Looping

of the

animation on or off.

Looping

Toggle the direction that the
animation is played in.

Reverse

Loads the animation again.

Recue

Eject the current still or
animation from the Media-Store

Eject

channel. This is the same as
loading media number

000

on

the panel.

Playlists

Playlists allow you to create a rundown of stills or
animations that you want to load into a Media-Store
channel. Using the left and right arrows, you can advance
to the next or previous still or animation in the playlist.

Note:

Items on the playlist are not pre-cached. As you advance

to the next item in the list, the switcher must load that still or
animation. Depending on what you are loading, and if the item
has been loaded before, this could take a few seconds.

Figure 26: Playlist

Table 6: Playlist Controls

Description

Name

Icon

Advance to the previous item
in the playlist. The item in the

Previous

playlist that is being shown on

Description

Name

Icon

the Media-Store channel
indicated with a check-mark.
The playlist does not loop back
to the top when it reaches the
last item.

Advance to the next item in the
playlist.

Next

Move the currently selected
item up in the playlist.

Up and Down

Move the currently selected
item down in the playlist.

Up and Down

Delete the selected item from
the playlist. This does not

Delete

delete the item, or clear the
Media-Store channel.

Clears the current playlist.

New Playlist

Allows you to load, save, or
delete a playlist on the

Load or Save
Playlist

switcher. If you delete a playlist
that was loaded into a
Media-Store channel, it does
not clear that channel.

Expand or Collapse the playlist
area for the Media-Store
channel.

Expand or
Collapse

58

• Media-Store — Carbonite Operation Manual (v13.0)

«
...
56
57
58
59
60
...
»

Содержание Carbonite Series

































































































Отзывы:

Нет отзывов