Ross Carbonite Series Скачать руководство пользователя страница 40

Страница: 40 / 96

Use the

Type

knob to select

Additv

and the

Value

knob to turn additive keying on or off. Click an

Additive Keying

button to turn it on or off.

•

Off

— Reduces the level of detail in the edges

of the chroma key as well as the overall noise in
the key image that can be the result of certain
lighting conditions or high detail camera settings.
This is the default setting.

•

— Include the maximum detail in the edges

of the chroma key.

Use the

Type

knob to select

Bkgd

10.

Use the

Cntrl

knob to select

NegHue

and use the

Value

knob to adjust the range of hues that are

included in the Background, expanding
counter-clockwise around the color wheel. Use the

Background Neg Hue

slider to adjust the range

of hues that are included in the Background,
expanding counter-clockwise around the color
wheel.

11.

Use the

Cntrl

knob to select

PosHue

and use the

Value

knob to adjust the range of hues that are

included in the Background, expanding clockwise
around the color wheel. Use the

Background Pos

Hue

slider to adjust the range of hues that are

included in the Background, expanding clockwise
around the color wheel.

12.

Use the

Cntrl

knob to select

Sat

and use the

Value

knob to adjust the saturation range of the background
color. Use the

Background Sat

slider to adjust

the saturation range of the background color.

•

Increasing the saturation range value includes a
wider range of saturation values to be included
in the background.

•

Decreasing the saturation range value includes
a narrower range of saturation values to be
included in the background.

13.

Use the

Type

knob to select

Edge

and use the

Value

knob to add or remove edge softening of the

foreground image and alpha channel. Use the

Edge

Softness

slider to add or remove edge softening

of the foreground image and alpha channel.

•

Increasing the softness value increases the
amount of softness applied to the foreground
edges and alpha channel.

•

Decreasing the softness value decreases the
amount of softness applied to the foreground
edges and alpha channel.

14.

Use the

Type

knob to select

Foregd

15.

Use the

Cntrl

knob to select

Clip

and use the

Value

knob to adjust the foreground clipping. Use the

Foreground Clip

slider to adjust the foreground

clipping.

•

Increasing the clip value removes lower-saturated
colors from the Foreground image.

•

Decreasing the clip value includes
lower-saturated colors in the Foreground image.

16.

Use the

Cntrl

knob to select

Hue

and use the

Value

knob to select the central (base) color for the
foreground. Use the

Foreground Hue

slider to

select the central (base) color for the foreground.

•

Increasing the hue value moves
counter-clockwise around the color wheel to
select a base color.

•

Decreasing the hue value moves clockwise
around the color wheel to select a base color.

17.

Use the

Cntrl

knob to select

Reject

and use the

Value

knob to include or reject hues adjacent to the

base color. Use the

Foreground Reject

slider to

include or reject hues adjacent to the base color.

•

Increasing the reject value decreases the amount
of adjacent hues that are included in the
foreground.

•

Decreasing the reject value increases the amount
of adjacent hues that are included in the
foreground.

18.

Use the

Type

knob to select

Lum

19.

Use the

Cntrl

knob to select

BkLuma

and use the

Value

knob to change the overall brightness of

Shadow, Translucent, and Transition areas. Use the

Background Suppress

slider to change the

overall brightness of Shadow, Translucent, and
Transition areas.

•

Increasing the background suppress value
increases the brightness of Background,
Translucent, and Transition areas.

•

Decreasing the background suppress value
decreases the brightness of Background,
Translucent, and Transition areas.

20.

Use the

Cntrl

knob to select

Refl

and use the

Value

knob to change the brightness of semi-transparent
reflections (like reflections from glasses). Use the

Luminance Reflection

slider to change the

brightness of semi-transparent reflections (like
reflections from glasses).

•

Increasing the reflections value increases the
brightness of semi-transparent reflections.

•

Decreasing the reflections value decreases the
brightness of semi-transparent reflections.

21.

Use the

Type

knob to select

Shadow

• Keying — Carbonite Operation Manual (v13.0)

Содержание Carbonite Series

































































































Результаты поиска

Содержание Carbonite Series

Отзывы:

Ross Carbonite Series, Руководство по эксплуатации, Страница: 40 / 96

Результаты поиска

Содержание Carbonite Series

Отзывы: