Riftek RF627 Series, Руководство пользователя

Страница: 71 / 130

RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
71
Parameters: “Mode” above Take into account the points lying above the
baseline.
below Take into account the points lying below the
baseline.
above below
Parameters: “Threshold”, mm 0,01...100 The threshold of the deviation from the baseline. The
deviations less than the threshold are not taken into
account - they are considered noise.
“Threshold” = 0.01 mm “Threshold” = 0.1 mm
Inputs: “in1” SDT_LINE The baseline against which the deviations are
analyzed.
Outputs: “area” SDT_SCALAR
The total area of deviations, mm
2
.
“calculate roughness” - calculating the roughness of the profile relative to the input baseline.
Parameters: “Mode” std. dev. The standard deviation.
pos dev The maximum positive deviation (upward relative to
the base segment).
neg dev The maximum negative deviation (downward relative
to the baseline).
std. dev. pos dev neg dev
Inputs: “in1” SDT_SEGMENT The base segment with respect to which the
roughness is analyzed.
Outputs: “value” SDT_SCALAR
The roughness value, mm
2
.