Riftek RF627 Series, Руководство пользователя

Страница: 68 / 130

68
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
bottom The angle whose vertex has the minimum Z
coordinate.
left The angle whose vertex has the minimum X
coordinate.
right The angle whose vertex has the maximum X
coordinate.
value The first angle satisfying the "Angle average" and
"Angle tolerance" parameters.
“Angle value” 0...179 The desired angle value.
“Angle tolerance” 0...89 The maximum permissible deviation (in both
directions) from the desired angle.
Examples:
top bottom left right
“Angle value” = 24,
“Angle tolerance” = 2
“Angle value” = 99,
“Angle tolerance” = 2
“Angle value” = 105,
“Angle tolerance” = 2
“Angle value” = 25,
“Angle tolerance” = 2
Outputs: “pos” SDT_POINT Vertex coordinates.
"angle" SDT_SCALAR The angle value in degrees.
“edge detector” - searching for the difference in height between two segments of the profile.
Parameters: “Mode” rise Height difference “rise”.
fall Height difference “fall”.
any Any direction of height difference. The choice is
made by height difference.
rise fall any
“Min step”, mm 0,01...1000 The minimum allowable height difference for
detection. The direction is not taken into account.