Riftek RF627 Series, Руководство пользователя

Страница: 18 / 130

18
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
15.2. Display modes
15.2.1. Profile mode
The Profile mode is intended to view a two-dimensional profile on the grid. The
vertical axis corresponds to the Z coordinate of the scanner, the horizontal axis corresponds
to the X coordinate of the scanner.
The profile is displayed in red, the measuring range of the scanner is displayed in
white, the region of interest (ROI) is displayed in yellow (if ROI mode is enabled). When you
hover the mouse over the selected area of the grid, a cursor appears indicating the position
in the scanner coordinates. Moving an image is done with the mouse while holding down
the right key.
Viewing the current profile in real time can be controlled by the Pause / Play
button, which is located in the area of additional display options.
In Raw mode ( General tab > Stream section > Data format ), an uncalibrated
profile is displayed on the grid. In this case, the coordinate grid has a pixel dimension.