Riftek RF627 Series, Руководство пользователя

Страница: 77 / 130

RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
77
Outputs: “det” SDT_BOOL Flag of successful template detection (the
joint is recognized, the correct data is output).
“segment #1” SDT_SEGMENT Segment #1.
“segment #2” SDT_SEGMENT Segment #2.
“segment #3” SDT_SEGMENT Segment #3.
“segment #4” SDT_SEGMENT Segment #4.
“lap weld” - block parameters are the same as parameters of the “lap left” template of the
“templates set” block.
Outputs: “det” SDT_BOOL Flag of successful template detection (the
joint is recognized, the correct data is output).
“segment #1” SDT_SEGMENT Segment #1.
“segment #2” SDT_SEGMENT Segment #2.
“segment #3” SDT_SEGMENT Segment #3.
“v-groove weld” - block parameters are the same as parameters of the corresponding template
of the “templates set” block.
Outputs: “det” SDT_BOOL Flag of successful template detection (the
joint is recognized, the correct data is output).
“segment #1” SDT_SEGMENT Segment #1.
“segment #2” SDT_SEGMENT Segment #2.
“segment #3” SDT_SEGMENT Segment #3.
“segment #4” SDT_SEGMENT Segment #4.
“square groove weld”:
Parameters: “Min len (left segment)”, mm
“Max len (left segment)”,
mm
0,1...1000
0,1...1000 Minimum and maximum length of the segment
to the left.
“Min len (right segment)”,
mm
“Max len (right segment)”,
mm 0,1...100
0,1...100 Minimum and maximum length of the segment
to the right.
“Min distance”, mm
“Max distance”, mm 0...100
0,1...100
Minimum and maximum allowable distance
between the end of the left segment and the
beginning of the right one.
“Angle”, deg
“Angle tolerance”, deg -150…-50
0...89
Value and permissible deviation of the angle
between the segments.
Outputs: “det” SDT_BOOL Flag of successful template detection (the
joint is recognized, the correct data is output).