Riftek RF627 Series, Руководство пользователя

Страница: 59 / 130

RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
59
Source profile Maximum deviation = 2 mm
Maximum deviation = 1 mm Maximum deviation = 0.1 mm
Examples of the influence of parameters on splitting a fragment into a set of
segments. The Maximum amount parameter:
Maximum amount=2 Maximum amount = 4
Maximum amount = 5 Maximum amount = 10. New lines were not added,
since all approximating lines meet the criterion
Maximum deviation = 1 mm
24.2.1.2.2. Approximation by arcs
Approximation parameters:
·
Enable - enables the use of arcs when approximating the profile. If the parameter
is OFF , then the profile will be approximated only by segments.
·
Minimum size, points - sets the minimum required number of points that must
form an arc. If a profile element contains fewer points, it will be approximated by a
line segment.