Riftek RF627 Series, Руководство пользователя

Страница: 37 / 130

RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
37
Parameter Factory value Description
Divider is "2", it applies for every second signal at the input, etc.
Setting the Divider parameter allows, for example, to match the
frequency of the input signals and the permissible frequency of the
scanner.
Delay, us OFF Delay from the start of the synchronization signal to the
synchronization event (the start of the measurement cycle).
20.4.1. Setting the inputs
The Inputs section contains the parameters of the inputs.
Parameters of Inputs #1 and #2:
Parameter Factory value Description
Enable OFF Enable / disable the input.
Mode Rise or Fall Input signal processing mode:

Rise or fall – Synchronization by rise or fall.

Rise – Synchronization by rise.

Fall – Synchronization by fall.

High level — Synchronization by high level.

Low level — Synchronization by low level.
Input #3 of the scanner is designed to connect the reset signal of the measurement
counters and the encoder.
Parameters:
Parameter Factory value Description
Enable OFF Enable / disable the input.
Mode Rise Reset signal processing mode:

Rise — Reset by front.

Fall — Reset by fall.
20.4.2. Setting the encoder counter
The Counter section contains the settings for the encoder counter.