Riftek RF627 Series, Руководство пользователя

Страница: 36 / 130

36
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
20.3. Selecting a source of synchronization events
To select the source of synchronization events, use the Sync source section of the
Triggering tab:
Sync source Description
INTERNAL Default source. Synchronization of profiles by the internal scanner generator.
The events that trigger the measurement cycle follow at a frequency equal to
the set FPS.
EXTERNAL Synchronization of profiles by external trigger. A detailed description is given
below.
EXTERNAL BY REQUEST Waiting for a request (by service protocol) for profiles from third-party software.
An external trigger is used for synchronization. If there is no request, the
measuring cycle is not started.
INTERNAL BY REQUEST Waiting for a request (by service protocol) for profiles from third-party software.
An internal generator is used for synchronization. If there is no request, the
measuring cycle is not started.
20.4. Synchronization by external trigger
The Trigger section is used to configure an external synchronization signal. This
section is available only when the External source is selected. Input #1 and/or Input #2 are
used to send a signal.
Parameters:
Parameter Factory value Description
Trigger source Input #1 Selecting an input for an external sync signal or a combination of
inputs. Available modes:

Input #1 – Synchronization by signal from Input #1.

Input #2 – Synchronization by signal from Input #2.

Input #1 OR #2 – Synchronization by any of the signals from
both inputs.

Input #1 AND #2 – Synchronization by coincidence of signals on
both inputs.
Strict sync ON Forced binding of the beginning of exposure to the synchronization
signal. This mode is designed to eliminate the stroboscopic effect
on the synchronization inputs.
Divider 1 Input pulse divider. The measuring cycle starts with an external
synchronization signal, taking into account the
Divider parameter.
If the Divider is "1", it applies for each signal at the input. If the