Riftek RF627 Series, Руководство пользователя

Страница: 116 / 130

116
Laser Scanners
RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Parameters:
·
value - target angle between base elements and relative elements (positive values define
the counterclockwise direction);
·
tolerance - deviation from the target angle (determined on both sides of the target angle).
Distance ortho The distance between the starting point of the relative element and the starting point of the
main element in the perpendicular direction (the perpendicular is set by the main element):
Parameters:
·
min - minimum allowable distance in perpendicular direction;
·
max - maximum allowable distance in perpendicular direction.
32.3.2.3. Adding constraints to a template
To add a constraint, select the main and relative lines. When you click on a line, the
main line is selected first (highlighted in purple). If the main line is already selected, then the
next click selects the relative line (highlighted in yellow). When clicking outside the lines of
the template, the current selection is cleared.
Original template Clicking on the first element of the template.
The first element is selected as the main one.
Clicking on the second element of the template.
The second element is selected as the relative one.
Clicking outside the elements of the template.
The selection has been cleared.
After selecting elements, buttons for adding constraints appear in the template
settings area: