Riftek RF627 Series, Руководство пользователя

Страница: 17 / 130

RF627, RF627Smart [Revision 2.1.2] 20.09.2021
Laser Scanners
17
14. Search for scanners on the network and
connection
Enter the IP address of the scanner into the address bar of the web browser and
press the Enter key. When the scanner is detected on the network, the browser will display
its web page.
If all the settings are correct and the entered IP address is the IP address of the
scanner, the Ethernet field will display Link and the current connection speed. The scanner
is ready to operate.
15. Results display area
In this area you can view:
·
a calibrated profile (the profile in Cartesian coordinates of the scanner), or
·
an uncalibrated profile extracted from the image, or
·
a video stream from the CMOS sensor of the scanner with the overlay of the
uncalibrated profile extracted from the image.
15.1. Controls
The controls are located at the top of the results display area:
1 – display mode buttons;
2 – additional display options;
3 – zoom buttons.
Area 1 contains buttons that are intended to select the data display mode. Possible
modes:
Display mode Icon Description
Profile Displaying the profile on a 2D grid.
Video Viewing the video stream from the CMOS sensor of the scanner.
The content of the controls in Area 2 depends on the selected display mode and is
described in section 15.
Area 3 contains the following buttons:
Icon Description
Zoom in.
Zoom out.
Reset zoom. NOTE: Returning the image to its original scale is also possible by
double-clicking the left mouse button in the display area.
NOTE: Zooming in / out can also be done with the mouse wheel.