Raritan EMX2-888, Руководство пользователя

Страница: 83 / 568

Chapter 5: Using the EMX
69
Number Example information
The selected environmental sensor's reading is 22 .
The word "MASTER" indicates the EMX is the master
device in a USB-cascading configuration. See
Cascading
the EMX via USB
(on page 22).
Note: For a standalone EMX, this word is NOT displayed.
For a slave device, it shows "SLAVE" instead.
The measurement unit is (degrees in Celsius).
To display the environmental sensor information:
1. Press the MODE button until this product enters the Sensor mode,
as indicated by "SENSOR" at the top of the LCD display.
2. Press the Up or Down button until the desired environmental
sensor's ID number is displayed.
For example, "SENSOR 1" refers to the sensor #1 listed on the EMX
web interface. "1 SENSOR 24" refers to the #124 sensor.
3. The LCD display shows the reading or state of the selected sensor in
the middle of the LCD display.

When showing a numeric sensor's reading, the appropriate
measurement unit is displayed to the right of the reading.
Measurement
units Sensor types
% A relative humidity sensor
A temperature sensor
m/s An air flow sensor
Pa An air pressure sensor
NO measurement
units For an "absolute" humidity sensor, the
measurement unit is g/m
3 , which cannot be
displayed on the LCD.
 Available states for a discrete sensor:
States Description
nor The sensor is in the normal state.
ALA The sensor enters the alarmed state.
This state is accompanied with the word "ALARM"
below it.
 Available states for a dry contact signal actuator (DX sensor
series):