Raritan EMX2-888, Руководство пользователя

Страница: 413 / 568

Chapter 8: Using the Command Line Interface
399
2. Type the following command and press Enter.
config:# password
3. Type the existing password and press Enter when the following
prompt appears.
Current password:
4. Type the new password and press Enter when the following prompt
appears.
Enter new password:
5. Re-type the new password for confirmation and press Enter when
the following prompt appears.
Re-type new password:
Setting Default Measurement Units
Default measurement units, including temperature, length, and pressure
units, apply to the EMX user interfaces across all users except for those
whose preferred measurement units are set differently by themselves or
the administrator. Diverse measurement unit commands can be
combined so that you can set all default measurement units at a time. To
combine all commands, see
Multi-Command Syntax
(on page 431).
Note: The measurement unit change only applies to the web interface
and command line interface.
Tip: To change the preferred measurement units displayed in the EMX
user interfaces for a specific user via CLI, see
Changing Measurement
Units (on page 396).
Set the default temperature unit:
config:# user defaultpreferences preferredTemperatureUnit <option1>
Variables:

<option1> is one of the options:
C
or
F
.
Option Description
C This option displays the temperature in Celsius.
F This option displays the temperature in
Fahrenheit.
Set the default length unit: