Raritan EMX2-888, Руководство пользователя

Страница: 214 / 568

Chapter 6: Using the Web Interface
200
Syslog Message
Use this action to automatically forward event messages to the specified
syslog server. Determine the syslog transmission mechanism you prefer
when setting it up - UDP, TCP or TLS over TCP.
The EMX may or may not detect the syslog message transmission failure.
If yes, it will log this syslog failure as well as the failure reason in the
event log. See
Viewing the Local Event Log
(on page 232).
To configure a syslog message action:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
5. In the Action field, click the drop-down arrow and select the desired
action: Syslog message.
6. In the "Syslog server" field, specify the IP address to which the
syslog is forwarded.
7. In the Transport Protocol field, select one of the syslog protocols:
TCP or UDP. The default is UDP.
Transport
protocol types Next steps
UDP
 In the UDP Port field, specify an appropriate port number. Default is 514.

Select the "Legacy BSD Syslog Protocol (UDP only)" checkbox if applicable.
TCP If NO TLS certificate is required, type an appropriate port number in the TCP Port field.