Raritan EMX2-888, Руководство пользователя

Страница: 204 / 568

Chapter 6: Using the Web Interface
190
Action Function
Switch LHX/SHX Switches on or off the LHX/SHX device. See
Switch LHX/SHX
(on page 205).
This option is available only when the Schroff
LHX/SHX support has been enabled.
Record snapshots to
webcam storage Makes a connected webcam start or stop
taking snapshots. See
Record Snapshots to
Webcam Storage
(on page 206).
Switch peripheral
actuator Switches on or off the mechanism or system
connected to the specified actuator. See
Switch Peripheral Actuator
(on page 204).
6. Click OK to save the new action.
Note: If you do not click OK before quitting the current settings page,
a message appears. Then click Yes to save the changes, Discard to
abort or Cancel to return to the current settings page.
7. To create additional actions, repeat the above steps.
8. Click Close to quit the dialog.
Action Group
You can create an action group that performs up to 32 actions. After
creating such an action group, you can easily assign this set of actions to
an event rule rather than selecting all needed actions one by one per
rule.
To create an action group:
1. Choose Device Settings > Event Rules. The Event Rule Settings
dialog appears.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
5. In the Action field, click the drop-down arrow and select the desired
action: Execute an action group.
6. To mark an action as part of the action group, select it from the
Available Actions list box, and click to move it to the Used
Actions list box. To make multiple selections, press Ctrl+click or
Shift+click to highlight multiple ones.
To move all actions to the Used Actions list box, click . A
maximum of 32 actions can be grouped.