Raritan EMX2-888, Руководство пользователя

Страница: 110 / 568

Chapter 6: Using the Web Interface
96
3. In the Detection Mode field, select the way to display connected
LHX/SHX heat exchangers.
 Disabled: When applied, disables to port and nothing connected
to the port is detected.

Auto: An icon is displayed for this port only when the EMX device
detects the physical connection of the LHX/SHX heat exchanger
on this port. Otherwise, nothing is displayed. This is the default
approach.

Pinned: An icon is displayed for this port all the time, but the icon
image varies according to the connection status. See
Device
States and Icon Variations
(on page 280).
When the Pinned checkbox is selected, click the drop-down
arrow to select the appropriate device type for this port: LHX-20,
LHX-40 or SHX-30.
4. Click OK.
In the tree, the icon, if present, is followed by the device name if
available, device type and the port number or FEATURE port (if
applicable).
Setup Button
The Setup button is available for most tree items. It triggers a setup
dialog where you can change settings for the selected tree item.
Status Bar
The status bar shows five pieces of information from left to right.

Device name:
This is the name assigned to the EMX device. The default is "EMX."
See
Naming the EMX
(on page 110).

IP address:
The numbers enclosed in parentheses is the IP address assigned to
the EMX device. See
Initial Network Configuration via CLI
(on
page 15) or
Modifying Network Settings
(on page 114).
Tip: The presence of the device name and IP address in the status
bar indicates the connection to the EMX device. If the connection is
lost, it shows " " instead.