Raritan EMX2-888, Руководство пользователя

Страница: 69 / 568

Chapter 4: Connecting External Equipment (Optional)
55
Mixing Diverse Sensor Types
You can mix DPX, DPX2, DPX3 and DX sensor packages on any sensor
port of the EMX2-888 or EMX2-111 according to the following sensor
combinations. In some scenarios, the DPX3-ENVHUB4 sensor hub is
required.
When mixing different sensor types, remember that each sensor port
supports a maximum of 32 sensors/actuators. For the total number of
supported sensors/actuators for your EMX model, see
Connecting
Environmental Sensor Packages
(on page 39).
"1 DX + 1 DPX" per sensor port:

An RJ-12 to RJ-45 adapter cable is required for connecting the DX
sensor package to the EMX.

It is strongly recommended to use an RJ-12 to RJ-45 adapter to
connect the DPX sensor package to the DX sensor package.
Diverse combinations via the DPX3-ENVHUB4 sensor hub:

You must use the
DPX3
-ENVHUB4 sensor hub instead of the old
DPX-ENVHUB4 sensor hub. Each port on the hub supports any of
the following:
 A DX sensor package
 A chain of DX sensor packages
 A DPX3 sensor package
 A chain of DPX3 sensor packages
 A DPX2 sensor package
 A DPX sensor package