Raritan EMX2-888, Руководство пользователя

Страница: 219 / 568

Chapter 6: Using the Web Interface
205
 Turn On: Turns on the selected actuator.
 Turn Off: Turns off the selected actuator.
6. To select the actuator where this action will be applied, select it from
the Available Actuators list and click to add it to the Switched
Actuators list box. To make multiple selections, press Ctrl+click or
Shift+click to highlight multiple ones.
To add all actuators to the Switched Actuators list box, click .
7. To remove any actuator from the Switched Actuators list, select it
and click to move it back to the Available Actuators list box. To
make multiple selections, press Ctrl+click or Shift+click to highlight
multiple ones.
To remove all actuators, click .
8. Click OK.
Switch LHX/SHX
If Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions will
be available. See
Enabling and Disabling Schroff LHX/SHX Heat
Exchanger Support
(on page 273).
Use this action to switch the LHX/SHX on or off when, for example,
temperature thresholds are reached.
To create a switch LHX/SHX action:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
5. In the Action field, click the drop-down arrow and select the desired
action: Switch LHX/SHX.
6. From the Operation drop-down, select Turn LHX/SHX On or Turn
LHX/SHX Off.
7. From the Available LHX/SHXs list box, click on the LHX/SHX to be
turned on or off, then click or to add to the Switched
LHX/SHXs list box. Use or to remove the LHX/SHX from the
Switched LHXs list box, thereby removing the action.
8. Click OK.